中文Contact: Manager Ni
Telephone: 13773289099
Address: Building 9, Dehao Manufacturing Valley, Lekun Road, Zhangjiagang City, Jiangsu Province
With high-quality products, professional services, and systematic support, Xinyizhong helps the construction of modern factories in the filling industry,
to grow together with customers, and make the development of the enterprise go farther and longer.
This series of commercial and industrial reverse osmosis systems are engineered to economically produce high purity water by removal of dissolved minerals, bacteria, particles, and organic impurities. Each machine is constructed using the highest quality components and materials for reliable operation and exceptional performance. Product water capacity is 5000 liters per hour. Standard machine comes with pre-treatment including sand filter for removal of suspended solids and turbidity, activated carbon filter providing cost effective removal of chlorine, chloramines, and/or organics that can cause taste, odor, or color in water, dosing pump by which an antiscalant solution should be dosed before the reverse osmosis membranes to disperse calcium carbonate and sulfates precipitates in order to avoid scaling, a 5mirco cartridge filter prior to the high pressure pump serve as the final barrier to water born particles and reverse osmosis system which is a process in which dissolved inorganic solids (such as salts) are removed from a solution (such as water). This is accomplished by pressure of high pressure pump pushing the water through a semi permeable membrane. The membrane which is about as thick as cellophane allows only the water to pass through, not the impurities or contaminates. These impurities and contaminates are flushed down the drain.
Technical route and flow diagram instructions
Raw water tank → Booster pump → Sand filter → Activated carbon filter → Softener Micro filter→ High pressure pump → Reverse osmosis → Permeate tank
Key Features
Materials of Construction
Skid Frame: SS304
Membrane Elements:Hydraulics ESPA2-4040
Membrane Housings: SS304
Low pressure piping: SS304
High pressure piping: SS304
Pump and Motor
Pump: 304SS vertical multi-stage centrifugal
Motor: TEFC, 380/460 VAC, 3-phase, 50/60 Hz.
Standard Features
4” x 40” High rejection membrane elements
5-micron sediment pre-filter housing
Automatic inlet solenoid valve
PLC control
Product water conductivity monitor
Operating pressure gauges
Product and concentrate flow meters
Concentrate and recycle flow control valves
Low inlet pressure switch with shutdown alarm
Auto/Manual wash
Optional Equipment Available
Atmospheric storage tanks with level control and repressurization pump
Pressurized storage vessels
UV
Ozone generator
Membrane clean-in-place (CIP) systems
Pretreatment chemical injection systems
Technical Specifications
Model No | WT-RO-XYZ |
Capacity | 5000LPH(Liter per Hour) |
Nominal Recovery | 65-75% |
Nominal Salt Rejection | 99.60% |
Operating Temperature | 15°C-45°C |
Design Temperature | 25°C |
Feed Pump | 1.1KW |
High Pressure Pump | 5.5KW |
Voltage | 220V /380V/460V – 50Hz/60Hz |
Specifications are subject to change without notice, All rights are reserved.
Pure water water treatment
Three in one pure water filling machine
Aerated beverage filling machine
Can non - gas beverage filling machine
Bottle filling machine for aerated beverage
Glass bottle hot filling beverage filling machine
Pure water water treatment
Three in one pure water filling machine
Aerated beverage filling machine
Can non - gas beverage filling machine
Bottle filling machine for aerated beverage
Glass bottle hot filling beverage filling machine
Pure water water treatment
Three in one pure water filling machine
Aerated beverage filling machine
Can non - gas beverage filling machine
Bottle filling machine for aerated beverage
Glass bottle hot filling beverage filling machine
